Van Borselen offers quality filters for industrial applications
Products ➤ Filter CartridgesMembrane Filter Cartridge

BorsoPes Biological

Single Layer Polyethersulphone Membrane Cartridge Filters.

BorsoPES-Biological cartridges are based on a naturally hydrophilic polyethersulphone (PES) membrane with a mirrored asymmetric pore structure. BorsoPES-Biological cartridges exploit the narrow pore size distribution and high void volume of the media to provide a choice of cartridges capable of meeting the requirements of most applications. Careful media selection ensures that BorsoPES-Biological cartridges are also very suited to critical particle control down to 0.04 micron ratings.

BorsoPes Biological membrane cartridges are 100% integrity tested during manufacture by the forward flow diffusion test method.

Typical Applications

  • Pure water Supply 
  • Biopharmaceuticals 
  • Ophthalmic solutions
  • Electronics and semiconductors
  • Fine chemicals 
  • Beverages

Specifications

Materials of Manufacture​  
Filter media Polyethersulphone
Membrane support Polypropylene
Irrigation mesh (support) Polypropylene
Drainage Layer Polypropylene
Inner core Polypropylene
End fittings Polypropylene
Outer Support Polypropylene
Support ring Stainless steel
   
Cartridge Dimensions  
Diameter 70mm (2,8'')
Length 254mm (10”)
  508mm (20”)
  762mm (30”)
  1016mm (40”)
   
Grades  
Rating 99,98% (beta 5000)
Micron 0.04, 0,1, 0.2, 0.45, 0.65 and 1.2 micron
   
Adapters  
Doe Double open end
Code 3 Single open end with Flat closed and external 222 o-rings
Code 7 Single open end with Fin end, 2 locking tabs and external 226 O-ring
Code 8 Single open end with fin end and external 222 O-rings
   
  Many more adapters available on request.
   
Cartridge Treatment  
Standard Cleand and Flushed with pyrogen-free water. 
Rinsed Ultra-clean, pulse flushed to give a system resistivity of 18MΩ.cm
   
Seals  
  Ethylene Propylene
Viton
Nitrile
FEP Encapsulate Viton
FEP Encapsulate Silicon
   
Additional information  
  All cartridges and seals are approved according to:

FDA 21 CFR 177
EC Directive 1935/2004
USP class VI
 

bpb-borsopes-biological_web

Integrity testing

Each BorsoPes-Biological module of every cartridge is individually integrity tested using the diffusive flow test, which correlates to the HIMA and ASTM F838-05 bacterial challenge test. Non-destructive integrity test, such as pressure hold, Diffusive flow and Bubbel point, can be performed by costumers. Procedural details are available from Van Borselen Filter the Netherlands. 

Replacement for

The BorsoPes-B is a replacement for: 
Parker
Pall  
Milipore

Van Borselen Filters
Argonstraat 66
2718 SN Zoetermeer
Nederland
079-341 23 14
info@vanborselen.nl
ma-vr 08:30-17:00
KvK-nummer: 27103715

This site uses cookies. You can accept them by clicking Ok