BorsoPes-Biological +

A Double layer Polyethersulfone membrane filter cartridges. The filter is ideally suited for filtering unwanted microbiological contamination.

For more information click here or contact us by phone or e-mail

More Information

Material Polyetersulfone
Application Water, Food and Beverage, Pharmacy, Semiconductor
Type Membrane Filter Cartridge
Diameter 70mm (2,8'')
Cartridge lenght 254mm (10”), 508mm (20”), 762mm (30”), 1016mm (40”)
Micron 0.04, 0.1, 0.2, 0.45, 0.65, 1.2
Adapters Doe / Double open end, Code 3 / Single open end with Flat closed and external 222 o-rings, Code 7 / Single open end with Fin end, 2 locking tabs and external 226 O-ring, Code 8 / Single open end with fin end and external 222 O-rings
Cartridge treatment Standard - Cleand and Flushed with pyrogen-free water. , Rinsed - Ultra-clean, pulse flushed to give a system resistivity of 18MΩ.cm
Seals Ethylene Propylene, Viton, Nitrile, FEP Encapsulate Viton, FEP Encapsulate Silicon

Product addition / Datasheet

Description / BorsoPes-Biological +

The BorsoPes-Biological+ is a double layer PES (polyethersulphone) membrane filter candle. The BorsoPes-Biological+ Membrane Filter cartridges are available in micronages 0.04µm, 0.1µm, 0.2µm with a Log reduction value 10^7 and 10^9. The BorsoPes-Biological+ uses a large filter area of advanced PES (polyethersulphone) membrane and features a pre-filtration layer. This double layer membrane filter made of natural hydrophilic Polyethersulphone media exhibits high flow rates and low binding of the active ingredients.

The BorsoPes-Biological+ Membrane Filter cartridges are available in micronages 0.04 micron, 0.1 micron, 0.2 micron with a Log reduction value 10^7 and 10^9.

BorsoPes Biological Membrane Filter cartridges are 100% integrity tested during production using the forward flow diffusion test.


Materials of Manufacture​

Filter media: Polyethersulphone
Membrane support: Polypropylene
Irrigation mesh (support): Polypropylene
Drainage Layer: Polypropylene
Inner core: Polypropylene
End fittings: Polypropylene
Outer Support: Polypropylene
Support ring: Stainless steel

This is our alternative for the following products